Our publications

LIT_175: Trilling, J., Schumacher, A., Zhou, M. (2024): "Reinforcement learning based agents for improving layouts of automotive crash structures." Applied Intelligence, DOI: https://doi.org/10.1007/s10489-024-05276-6

LIT_174 : Beyer, F., Schumacher, A., Pohl, T. (2022): "Neue Möglichkeiten der Graphen- und Heuristikbasierte Topologieoptimierung von 3D-Crash-Strukturen durch detaillierte Modellierung der Verbindungsknoten", SIMVEC, VDI-Berichte 2407, 213-224

LIT_173 : Trilling, J., Schumacher, A., Zhou, M. (2022): "Einsatz von Reinforcement Learning zur lokalen Versteifung von Extrusionsprofilen in Crashlastfällen", Zeitschrift für numerische Simulation und angrenzende Gebiete, NAFEMS-Online-Magazin, 2/2022, 62. Ausgabe, 59-70

LIT_172 : Schumacher, A., Beyer, F. (2022): "Graph and Heuristic based Topology Optimization of 3D crash structures - Presentation of all essential modules of the fully automatic process", LS-DYNA-Forum, 11.-13. Oktober 2022

LIT_171 : Wielens, S., Benito Cia, L., Schumacher, A. (2022): Using automatically generated submodels in vehicle body crash optimization, International Journal of Crashworthiness, DOI: 10.1080/13588265.2022.2109873 

LIT_171 : Schumacher, A. (2022): State of the art in using deep learning algorithms and expert knowledge schemes for supporting mathematical optimization procedures, Proceeding of the Automotive CAE Grand Challenge 2022, 5th and 6th of July 2022 in Hanau, Germany 

LIT_170 : Plaschkies, F., Vaculín, O., Pelisson, A.A., Schumacher, A.: Schnelle Abschätzung des Crashverhaltens von Insassen unter Berücksichtigung der Vielfalt des Menschen: Robustheit, Datenintensität und Vorhersagekraft von Metamodellen, 13. VDI-Tagung Fahrzeugsicherheit, 30.-31. Mai, 2022, Berlin

LIT_169 : Kracker, D., Dhanasekaran, R.K., Schumacher, A., Garcke, J. (2022): "Method for automated detection of outlier in crash simulation, Intl. Journal of Crashworthiness, doi.org/10.1080/13588265.2022.2074634

LIT_168 : Trilling, J., Schumacher, A., Zhou, M. (2022): Generation of designs for local stiffness increase of crash loaded extrusion profiles with reinforcement learning, Proceedings of the NAFEMS-Conference on Machine Learning and Artificial Intelligence in CFD and Structural Analysis, 16-17 May 2022, Wiesbaden, p. 56-66

LIT_167 : Klinke, N., Kobelev, V., Schumacher, A. 2022): Rule and optimization‑based selection of car body parts for the application of tailor rolled blank technology, Structural and Multidisciplinary Optimization (2022) 65:60

LIT_166 : Plaschkies, F., Vaculín, O., Pelisson, A.A., Schumacher, A. (2021): Schnelle Abschätzung des Crashverhaltens von Insassen unter Berücksichtigung der Vielfalt des Menschen: Robustheit, Datenintensität und Vorhersagekraft von Metamodellen, 13. VDI-Tagung Fahrzeugsicherheit, 24.-25.11.2021, Berlin

LIT_165 : Ortmann, C.,Sperber, J., Schneider, D., Link, S., Schumacher, A. (2021): Crashworthiness design of cross-sections with the Graph and Heuristic based Topology Optimization incorporating competing designs, Structural and Multidisciplinary Optimization (2021) 64:1063-1077

LIT_164 : Pakiman, A., Garcke, J., Schumacher, A. (2021): Data Representation of Crash Scenarios by Graph Structures, Proceedings of the 13th European LS-DYNA Conference & Users Meeting, Ulm, 2021

LIT_163 : Schumacher, A. (2021): "Optimization methods for the development of crash structures.", Proceedings of the Workshop on Virtual Development in Passive Safety and Human Models for Future Mobility, Pilzen, Czech Republic 2021

LIT_162 : Schumacher, A., Link, S., Sperber, J. (2021): ""Crashauslegung von aus Stahlblechen zusammengesetzten Profilen mit der Graphen- und

Heuristikbasierten Topologieoptimierung"", Umdruck der Hamburger Karosseriebautage, 29./30.September 2021"

LIT_161 : Plaschkies, F., Vaculín, O., Schumacher, A. (2021): "Assessment of the Influence of Human Body Diversity on Passive Safety Systems: A State-of-the-art Overview", Proceedings of the 38th Fisita World Conference, Sept. 14-16, 2021

LIT_160 : Sperber ,J., Banda, E.B., Ortmann, C., Schumacher, A. (2021): "Graph Based Algorithms to Enhance Mid-Surface Design Fidelity of Finite Element Models of Extrusion Profiles." In: Dröder, K., Vietor, T. (eds): Technologies for economic and functional lightweight design. Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-62924-6_31

LIT_159 : Schumacher, A. (2021): Powerful optimization methods to improve the performance of lightweight, Proceeding of the ESI Live Conference 2021, online, Nov. 4, 2021

LIT_158 : Büttner, J., Schwarz, S., Schumacher, A., Bäck, T. (2021): "Global Sensitivity Matrix for Vehicle Development, ATZ worldwide 123(3):26-31

LIT_157 : Klinke, N., Schumacher, A. (2021): Optimization of tailor rolled blanks under consideration, of function, formability and cost, Thin-Walled Structures, 161 (2021) 107437

LIT_156 : Beyer, F., Schneider, D., Schumacher, A. (2021): Finding three-dimensional layouts for crashworthiness load cases using the graph and heuristic based topology optimization, Journal of Structural and Multidisciplinary Optimization, (2021) 63:59-73, https://doi.org/10.1007/s00158-020-02768-0

LIT_155 : Schumacher, A. (2020): Optimierung mechanischer Strukturen – Grundlagen und industrielle Anwendungen, 3. Auflage, Springer-Verlag, Berlin, Heidelberg,2020, ISBN 978-3-662-60327-7, https://rd.springer.com/book/10.1007/978-3-662-60328-4

LIT_154 : Büttner, J., Schwarz, S., Schumacher, A. (2020): "Reduction of the Numerical Resource Requirements for Multidisciplinary Optimization", ATZ Electron Worldw 15, 52–57 (2020). https://doi.org/10.1007/s38314-020-0284-1

LIT_153 : Clemens, P., Schumacher, A. (2021): "New scheme to overcome local optima in the Voxel-Based Topology Optimization of Sheet Metal Structures", In: F. Chinesta, R. Abgrall, O. Allix and M. Kaliske (Eds): Proceeding of the 14th World Congress in Computational Mechanics (WCCM), ECCOMAS Congress 2020, Paris, France, www.scipedia.com/public/Clemens_Schumacher_2021a

LIT_152: Decker, S., Baumgart, C., Krüger, L., Schumacher, A. (2020): Electron beam melting of various structures and their quasi-static compression behavior. Materials Science & Engineering A 793 (2020) 139849

LIT_151: Schumacher, A., Beyer, F. (2020): Untersuchung zu den Einsatzmöglichkeiten der Graphen- und Heuristikbasierten Topologieoptimierung zur Entwicklung von 3D-Rahmenstrukturen in Crashlastfällen, FAT-Schriftenreihe 329, ISSN 2192-7863

LIT_150: Büttner, J., Schumacher, A. (2020): "Activities for Speed up the Optimization Processes in Car Body Design", Proceeding of the Automotive CAE Grand Challenge 2020, 29th and 30th of October 2020 in Hanau, Germany

LIT_149: Benito-Cia, L., Wielens, S., Schöne, C., Schumacher, A. (2020): "Automatic Submodel-based Multi-Level Optimization of Crash Structures", Proceeding of the Automotive CAE Grand Challenge 2020, 29th and 30th of October 2020 in Hanau, Germany

LIT_148 : Mertler, S., Schumacher, A., Jansen, L. (2020): "Reduced Order Modeling for Correlation Analysis of Crash Structures ", Proceeding of the Automotive CAE Grand Challenge 2020, 29th and 30th of October 2020 in Hanau, Germany

LIT_147: Kracker, D., Garcke, J., Schumacher, A., Schwanitz, P. (2020): "Automatic analysis of crash simulations with dimensionality reduction algorithms such as PCA and t-SNE", 16th Intl. LS-DYNA Users Conference, June 10-11, 2020 www.dynalook.com/conferences/16th-international-ls-dyna-conference/automotive/t1-1-a-automotive-011.pdf/view

LIT_146: Schlosser, M., Schumacher, A., Bellendir, K. (2019): "Effective Modeling of Load Applications in Composite Structures - Accuracy, Complexity, Computer Time", in: Hausmann, J.M.: Selected papers from the "22 nd Symposium on Composites", June 26-28, 2019, Kaiserslautern, Germany, Trans Tech Publications, In: Key Engineering Materials (2019), S. 461-466. doi: 10.4028/www.scientific.net/KEM.809.461.

LIT_145: Schneider, D., Schumacher, A., Donhauser, T., Huf, A., Schmeer, S. (2019): "Flexible Graph Syntax for the Topology Optimization of Crashworthiness Profile Structures Made from Thermoplastic Composites", in: Hausmann, J.M.: Selected papers from the "22 nd Symposium on Composites", June 26-28, 2019, Kaiserslautern, Germany, 493-499, Trans Tech Publications, In: Key Engineering Materials (2019), S. 493–499. doi: 10.4028/www.scientific.net/KEM.809.493.

LIT_144: Schumacher, A., Singh, H., Wielens, S. (2019): "Submodel-based Multi-Level optimization of crash structures using statistically generated universal correlations of the different levels", Proceeding of the World Congress of Structural and Multidisciplinary Optimization, May 20-24, 2019, Beijing, China

LIT_143 : Beyer, F., Schneider, D., Schumacher, A. (2019): "Development of heuristics dealing with material failure of composite profile structures for the Graph and Heuristic based Topology Optimization", Proceeding of the World Congress of Structural and Multidisciplinary Optimization, May 20-24, 2019, Beijing, China

LIT_142 : Dienemann, R., Schumacher, A. (2019): "Manufacturing Constraint for deep drawn Sheet Metals in Density based Topology Optimization", Proceeding of the World Congress of Structural and Multidisciplinary Optimization, May 20-24, 2019, Beijing, China

LIT_141: Sperber, J., Ortmann, C., Schumacher, A. (2019): "Optimal application of triggers for the deformation of crash structures under axial compression with consideration of geometrical imperfections", in: X.Guo, H. Huang (eds.): Advances in Structural and Multidisciplinary Optimization, ISBN 978-7-89437-207-9, 169-175

LIT_140 : Ramsaier, M., Till, M., Schumacher, A., Rudolph, S. (2019): "On a Physics-based Reconstruction Algorithm for Generating Clean Parametric Native CAD-Models from Density-based Topology Optimization Results", Proceeding of the World Congress of Structural and Multidisciplinary Optimization, May 20-24, 2019, Beijing, China

LIT_139 : Hafsa, S., Butt, J., Schumacher, A. (2019): "New geometric features in the topology optimization for adaptation of structures", , in: X.Guo, H. Huang (eds.): Advances in Structural and Multidisciplinary Optimization, ISBN 978-7-89437-207-9, 258-263

LIT_138 : Schumacher, A. (2019): "Considering of mass production characteristics and requirements in the structural optimization process", Proc. of the CIVIL-COMP Conferences 16-19 Sept. 2019, Riva del Garda, Italy

LIT_137: Ramsaier, M., Breckle, T., Till, M. , Rudolph. S., Schumacher, A. (2019): Automated evaluation of manufacturability and cost of steel tube constructions with graph-based design languages, 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Elsevier

LIT_136: Schumacher, A. (2019): "Integration of Manufacturing Process Simulations in the Design Loop", Proceeding of the Automotive CAE Grand Challenge 2019, 16th and 17th of April 2019 in Hanau, Germany

LIT_135 : Schumacher, A. (2019): "Expert Rules as a powerful support of the Topology Optimization Procedures of Crash Structures", Proc. of the 12th European LS-DYNA Conference 2019, Koblenz, Germany

LIT_134: Walser, A.F., Schumacher, A., Singh, H., Schöne, C., Benito Cia, L. (2018): „Verschachtelte Optimierung des Crashverhaltens von Fahrzeugen mit automatisch erzeugten und bewerteten Submodellen“, erscheint in den VDI-Berichten zum 19. VDI-Kongress SIMVEC – Simulation und Erprobung in der Fahrzeugentwicklung, 20.-21.11.2018 in Baden Baden

LIT_133: Weider, K., Schumacher, A. (2018): "Efficient analysis of topological sensitivities for crash problems using LS-Dyna implicit", Deutsches LS-DYNA Forum 2018, 15.-17.10.2018 in Bamberg

LIT_132: Weider, K., Schumacher, A. (2018): "Adjoint method for Topological Derivatives for optimization tasks with material and geometrical nonlinearities" in Rodrigues, H. et.al.: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 867-878, Springer Nature Switzerland, 2019”

LIT_131: Dienemann, R., Schumacher, A., Fiebig, S. (2018): "Considering linear buckling for 3D density based topology optimization" in Rodrigues, H. et.al.: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 394-406, Springer Nature Switzerland, 2019”

LIT_130: Link, S., Schneider, D., Schumacher, A., Ortmann, C. (2018): "Integration of flange connections in the Graph and Heuristic Based Topology Optimization of crashworthiness structures" in Rodrigues, H. et.al.: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 619-631, Springer Nature Switzerland, 2019

LIT_129: Schumacher, A. (2018): "On the current need of Expert Rules for the Topology Optimization of Structures with Non-Linear Behaviors", Proceeding of the 13th World Congress on Computational Mechanics (WCCM XIII) and 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York City, NY, USA

LIT_128: Schneider, D., Link, S., Schumacher, A., Ortmann, C. (2018): "Graph and Heuristic Based Topology Optimization of Crashworthiness Composite Profile Structures Manufactured by Vacuum Infusion and Gluing", Proceeding of the 13th World Congress on Computational Mechanics (WCCM XIII) and 2nd Pan American Congress on Computational Mechanics (PANACM II), July 22-27, 2018, New York City, NY, USA

LIT_127: Schumacher, A. (2018): "Einsatz der Strukturoptimierung zum Finden neuer Leichtbaustrukturen", Umdruck des Leichbaugipfels 2018, 13.-14.03.2018 in Würzburg

LIT_126: Schumacher, A. (2018): "Robust Design through Numerical Analysis - Research State of the Art", Proceeding of the Automotive CAE Grand Challenge 2018, 17th and 18th of April 2018 in Hanau, Germany

LIT_125: Schumacher, A., Vietor, T., Fiebig, S., Bletzinger, K.-U., Maute, K. (Hrsg.): Advances in Structural and Multidisciplinary Optimization, Proceedings of the 12th World Congress of Structural and Multidisciplinary Optimization (WCSMO12), Springer Nature, 2018, ISBN 978-3-319-67987-7, ISBN 978-3-319-67988-4 (eBook)

LIT_124: Schumacher, A., Singh, H., Falconi, C.(2017): "Möglichkeiten der Entwicklung von Fahrzeugkomponenten mit optimierten Submodellen", erscheint im Umdruck der VDI-Konferenz „Cabriolets“, 28.-29.06.2017 in Nürtingen, Deutschland

LIT_123: Dienemann, R., Schumacher, A., Fiebig, S. (2017): "An Element Deactivation and Reactivation Scheme for the Topology Optimization based on the Density Method"", to appear in the Proc of the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig"

LIT_122: Diez, C., Kunze, P., Toewe, D., Wieser, C., Harzheim, L., Schumacher, A. (2017): "Big-Data based rule-finding for analysis of crash simulations", to appear in the Proc of the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig

LIT_121 : Falconi, C.J.; Walser, A.F.; Singh, H.; Schumacher, A. (2017): “Automatic generation, validation and correlation of the submodels for the use in the Optimization of crashworthy structures", to appear in the Proc of the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig

LIT_120: Klinke, N., Schumacher, A. (2017): "Parameterization setup for metamodel based optimizations of Tailor Rolled Blanks", to appear in the Proc of the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig

LIT_119: Ramsaier, M., Stetter, R., Till, M., Rudolph, S., Schumacher, A. (2017): "Automatic Definition of density-driven Topology Optimization with graph-based Design Languages", to appear in the Proc of the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig

LIT_118 : Schneider, D.; Schumacher, A. (2017): “Finding best layouts for rips on surfaces for crash loads using the Graph and Heuristic Based Topology Optimization”, to appear in the Proc. of the the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig, Germany

LIT_117: Weider, K., Schumacher, A. (2017): "A topology optimization scheme for crash loaded structures using Topological Derivatives", to appear in the Proc. of the the 12th World Congress on Structural and Multidisciplinary Optimisation, 5th -9th, June 2017, Braunschweig, Germany

LIT_116: Weider, K., Marschner, A., Schumacher, A. (2017): “A Systematic Study on Topology Optimization of Crash Loaded Structures using LS-TaSC”, to appear in the Proc. of the 11th European LS-DYNA Conference 2017, 9. - 11. Mai 2017, Salzburg, Austria, 2017, http://www.dynalook.com/conferences/11th-european-ls-dyna-conference/optimization-topology/a-systematic-study-on-topology-optimization-of-crash-loaded-structures-using-ls-tasc

LIT_115 : Singh, H., Schumacher, A., Falconi, C.J., Walser, A. F., Trentmann, S., Leyre Benito, C., Foussette, C., Krause, P.: „Hierarchical Multi-Level-Optimization of crashworthy structures using automatic generated submodels”, to appear in the Proc. of the 11th European LS-DYNA Conference 2017, 9. - 11. Mai 2017, Salzburg, Austria, 2017

LIT_114 : Schumacher, A. (2017): "Aktuelle Möglichkeiten und Grenzen der Topologieoptimierung mechanischer Strukturen", Erscheint im Umdruck des 27. Ansys User Club (AUC)-Workshop, 04.-05. Mai, 2017 in Dresden

LIT_113 : Schumacher, A. (2017): "Topology Optimization for finding best component layouts - Research State of the Art", Proceeding of the Automotive CAE Grand Challenge 2017, 5th and 6th of April 2017 in Hanau, Germany

LIT_112 : Schumacher, A., Singh, H. (2017): Möglichkeiten der Multi-Level-Optimierung komplexer Crashstrukturen, 1. CAInspiration-Forums 2017, 29.03.2017 in München

LIT_111: Dienemann, R., Schumacher, A., Fiebig, S. (2017): “Using topology optimization for finding shell structures manufactured by deep-drawing”, Journal of Structural and Multidisciplinary Optimization, DOI 10.1007/s00158-017-1661-0, 2017, http://link.springer.com/article/10.1007/s00158-017-1661-0

LIT_110: Link, S., Singh, H., Schumacher, A. (2016): “Influence of submodel size and evaluated functions on the optimization process of crashworthiness structures", 14. LS-DYNA Forum 2016, Bamberg, https://www.dynamore.de/de/download/papers/2016-ls-dyna-forum/Papers

LIT_109: Diez, C., Wieser, C., Harzheim, L., Schumacher, A. (2016): “Automated Generation of Robustness Knowledge for selected Crash Structures", 14. LS-DYNA Forum 2016, 10.-12.10.2016 in Bamberg, https://www.dynamore.de/de/download/papers/2016-ls-dyna-forum/Papers

LIT_108: Klinke, N., Schumacher, A. (2016): “Finding the best thickness run parameterization for optimization of Tailor Rolled Blanks", 14. LS-DYNA Forum 2016, 10.-12.10.2016 in Bamberg, https://www.dynamore.de/de/download/papers/2016-ls-dyna-forum/Papers

LIT_107: Diez, C., Harzheim, L., Schumacher, A. (2016): “Effiziente Wissensgenerierung zur Robustheitsuntersuchung von Fahrzeugstrukturen mittels Modellreduktion und Ähnlichkeitsanalyse ", VDI-Berichte 2279

LIT_106: Srinivasan, M., Mättig, P., Glitza, K.W., Sanny, B., Schumacher, A., Duhovic, M. (2016): “Validation of Numerical Modeling for Prediction of Elastic and Failure behavior of Diamond Powder filled Woven Composites", to appear Open Journal of Composite Materials (OJCM)

LIT_105: Schumacher, A. (2016): "Topologieoptimierung von Crashstrukturen mit mathematischen Verfahren, Heuristiken und Submodelltechniken", Umdruck des 7. Freiberger Crashworkshops, 29.-30.09.2016, Freiberg

LIT_104: Schumacher, A. (2016): "Flexible design models for finding best vehicle concepts", Proceeding of the Automotive CAE Grand Challenge 2016, 12th and 13th of April 2016 in Hanau, Germany

LIT_103: Srinivasan, M., Mättig, P., Glitza, K.W., Sanny, B., Schumacher, A., Duhovic, M., Schuster, J. (2016): “Out of Plane Thermal Conductivity of Carbon Fiber Reinforced Composite Filled with Diamond Powder”, Open Journal of Composite Materials, 6, 41-57. dx.doi.org/10.4236/ojcm.2016.62005

LIT_102: Dienemann, R., Schumacher, A., Fiebig, S. (2016): “Topology and shape optimization of sheet metals with integrated deep-drawing-simulation”, Proceedings of the 12th World Congress on Computational Mechanics (WCCM XI), WCCM_2016_Dienemann_et_al.pdf

LIT_101: Hafsa, S., Schumacher, A. (2016): “Topology optimization method for the adaptation of existing structures to new requirements, thru addition of framework structures”, Proceedings of the 12th World Congress on Computational Mechanics (WCCM XI), WCCM_2016_Hafsa_et_al.pdf

LIT_100: Weider, K., Schumacher, A. (2016): “On the calculation of Topological Derivatives considering an exemplary nonlinear material model”, Proc. Appl. Math. Mech. 16, 717-718 (2016), http://onlinelibrary.wiley.com/doi/10.1002/pamm.201610347/pdf

LIT_099: Dienemann, R., Schumacher, A., Fiebig, S. (2016): “An efficient optimization method for mechanical shells considering cut-outs”, Proc. Appl. Math. Mech. 16, 713-714 (2016), http://onlinelibrary.wiley.com/doi/10.1002/pamm.201610345/epdf

LIT_098: Ortmann, C., Schumacher, A. (2015): Graphen- und Heuristikbasierte Topologieoptimierung (GHT) von Profilquerschnitten für Crashlastfälle, Online-Magazin, Zeitschrift für numerische Simulationsmethoden und angrenzende Gebiete, Oktober 2015 – Nr. 3/2015, 35. Ausgabe, ISSN 2311-522X 35-nafems-online-magazin-7.pdf

LIT_097: Walser, A. F., Schumacher, A. (2015): "Gemeinsam zur Erfolg", Digital Engineering Magazin 07-2015, Seiten 32-34

LIT_096: Schumacher, A., Riad, A.; Sauder, C.; Szabo, A. (2015): Leichtbaukonzepte für eine Cabrio-Karosserie - Systematische Strukturuntersuchung ausgehend von eine Limousine, Umdruck der VDI-Konferenz „Cabriolets“, 08.-09.07.2015 in Stuttgart

LIT_095: Schumacher, A. (2015): Leichtbau und Crashsicherheit: Aktuelle Forschungsfelder und Entwicklungsmethoden“, Unterlagen des Frühjahrseminars der Gesellschaft für Ursachenforschung bei Verkehrsunfällen (GUVU), 17. April 2015, Köln

LIT_094 : Fiebig, S., Sellschopp, J., Manz, H., Vietor, T., Axmann, J.K., Schumacher, A. (2015): “Future tracks for structural optimization for the industrial usage”, Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimisation, 07th -12th, June 2015, Sydney, Australia

LIT_093: Dienemann, R., Schumacher, A.; Fiebig, S. (2015): “Topology optimization considering the requirements of deep-drawn sheet metals”, Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimisation, 07th -12th, June 2015, Sydney, Australia, http://web.aeromech.usyd.edu.au/WCSMO2015/papers/1102_paper.pdf

LIT_092: Schumacher, A., Ortmann, C. (2015): “Combining state of the art meta-models for predicting the behavior of non-linear crashworthiness structures for shape and sizing optimizations”, Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimisation, 07th -12th, June 2015, Sydney, Australia

LIT_091: Ortmann, C., Schumacher, A. (2015): Graph and Heuristic Based Topology Optimization in consideration of the disciplines crash and statics, Proceedings of the NAFEMS Seminar: “Optimization and Robust Design”, 23 – 24 March 2015, Wiesbaden, Germany

LIT_090: Maurer, S.A., Hager, P., Schmidt, S., Schumacher, A. (2015): Verschleißreduktion an Umlenkungen in Leichtmetallgussbauteilen durch numerische Formoptimierung, Gießerei 102, 01/2015 http://www.kug.bdguss.de/fileadmin/content/themen/Verschleissreduktion_an_Umlenkungen/G-1-15-S28-33-PDF.pdf

LIT_089: Ortmann, C., Schumacher, A. (2014): Branching strategies for the application of heuristics to the topology optimization of crash loaded structures, Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI), Barcelona, 20-25 July 2014

LIT_088: Schumacher, A., Hakim, K., Ortmann, C. (2014): Einsatz von Metamodellen bei der Auslegung von Leichtbaustrukturen, Umdruck der VDI-Konferenz „Cabriolets“, 25.-26.06.2014 in Stuttgart

LIT_087: Srinivasan, M., Mättig, P., Glitza, K.W., Sanny, B., Schumacher, A. (2014): Multiscale calculation for increasing the thermal conductivity of carbon fiber composite with diamond powder, Proceedings of XLI International Summer School–Conference “Advanced Problems in Mechanics (APM)”, 481-490, St. Petersburg, June 30 – July 5, 2014, apm-conf.spb.ru

LIT_086: Schumacher, A., Hakim, K., Ortmann, C. (2014): „Mathematische Optimierung von Bauteilen mit hochgradig nicht-linearen Eigenschaften“, Forschungsreport für den Maschinenbau in Nordrhein-Westfalen, Public Verlag, 2014, ISSN 2198-395X

LIT_085: Ortmann, C., Schumacher. A. (2014): Mathematical Description and Algorithmization of Expert Knowledge for the Support of the Topology Optimization of Crashworthiness Structures, PAMM - Proc. Appl. Math. Mech. 14, 1023 – 1026 (2014) http://onlinelibrary.wiley.com/doi/10.1002/pamm.201410488/abstract

LIT_084: Schumacher, A. (2014): “Structural Optimization Background", Chapter 24 in: “Practical Aspects of structural optimization – A Study Guide”, www.altairuniversity.com/free-ebook-practical-aspects-of-structural-optimization-a-study-guide/

LIT_083: Ortmann, C., Schumacher, A. (2014): “Meta-models in structural optimization - techniques and strategies”, Proceeding of the Automotive CAE Grand Challenge 2014, 15th and 16st of April 2014 in Hanau, Germany

LIT_082: Lochner, I.; Schumacher, A. (2014): “Homogenization method: Distribution of material densities”, Chapter 17 in: S. Adriaenssens, P. Block, D. Veenendaal, C. Williams (eds.): Shells for Architecture - Form finding and structural optimization, Routledge-Verlag, ISBN 978-0-415-84060-6

LIT_081: Schumacher, A. (2014): Integration verfeinerter Materialmodelle in Form- und Topologieoptimierungsverfahren von Bauteilen, Umdruck des DVM-Workshops 2014: „Numerische Simulation in der Betriebsfestigkeit“, 05. und 06.02.2014

LIT_080: Schumacher, A. (2013): Gewichtseinsparpotenzial in der Konstruktion von Cabriolets, Umdruck der VDI-Konferenz „Cabriolets – Virtuelle Konzeption und Modellentwicklung“, 04.-05.06.2013 in Stuttgart

LIT_079: Schumacher, A.; Ortmann, C. (2013): "Rule generation for optimal topology changes of crash-loaded structures”, Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization, May 19 -24, 2013, Orlando, Florida, USA www2.mae.ufl.edu/mdo/Papers/5231.pdf

LIT_078: Ortmann, C.; Schumacher, A. (2013): "Hierarchical topology and shape optimization of crash-loaded profile structures”, Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization, May 19 -24, 2013, Orlando, Florida, USA (http://www2.mae.ufl.edu /mdo/Papers/5205.pdf) http://www2.mae.ufl.edu/mdo/Papers/5205.pdf

LIT_077: Schumacher, A. (2013): „Topology optimization of crash-loaded structures – Research State of the Art“, Proceeding of the Automotive CAE Grand Challenge 2013, 10th and 11st of April 2013 in Hanau, Germany

LIT_076: Schumacher, A.; Ortmann, C. (2013): Topologieoptimierung - Abschätzung der zukünftigen Möglichkeiten an konkreten Beispielen, 8. HyperWorks Anwendertreffen für Hochschulen am 08.03.2013 in Böblingen

LIT_075: Schumacher, A. (2013): Optimierung mechanischer Strukturen – Grundlagen und industrielle Anwendungen, 2. Auflage, Springer-Verlag, Berlin, Heidelberg, 2013, ISBN 978-3-642-34699-6 www.springer.com/springer+vieweg/maschinenbau/mechanik/book/978-3-642-34699-6

LIT_074: Ortmann, C.; Schumacher, A. (2013): "Graph and heuristic based topology optimization of crash loaded structures", Journal of Structural and Multidisciplinary Optimization (2013) 47:839–854 http://link.springer.com/article/10.1007/s00158-012-0872-7#page-1

LIT_073: Schumacher, A. (2013): Leichtbaustrategien für Fahrzeugkarosserien, CARHS Seminarunterlagen, erstes Seminar: 15.-16.04.2013 in Alzenau

LIT_072: Ortmann, C.; Schumacher, A. (2012): „Kombination von mathematischen Verfahren und aus Expertenwissen abgeleiteten Heuristiken zur topologischen Auslegung crashbelasteter Profilquerschnitte in Karosseriestrukturen“, VDI-Berichte Nr. 2169, Seite 241-356, 2012

LIT_071: Schumacher, A.; Ortmann, C. (2012): „Topology optimization of crash structures – creativity versus computer-based algorithms“, Proceeding of the 11th LS-DYNA Forum, Ulm, 9-10 October 2012 www.dynamore.de/de/download/papers/ls-dyna-forum-2012/documents/optimization-3-3

LIT_070: Schumacher, A.; Hakim, K. (2012): “Parametric shape optimization of cast parts considering the whole process from manufacturing to fatigue”, Proceeding of the Optimus World Conference, October 16-17, 2012, Munich

LIT_069: Schumacher, A.; Ortmann, C. (2012): “Crashoptimierung – Vergleich Intuition und Algorithmus“, Mobiles - Fachzeitschrift für Konstrukteure, Ausgabe 37 (2012/2013), 58-60 www.haw-hamburg.de/fileadmin/user_upload/FakTI/images/Publikationen/mobiles37.pdf

LIT_068: Schumacher, A., Ortmann, C. (2012): “Regelbasiertes Verfahren zur Topologieoptimierung von Profilquerschnitten für Crashlastfälle”, Tagungsbuch „Karosseriebautage Hamburg 2012, Vieweg-Verlag, Wiesbaden

LIT_067: Schumacher, A., Wagner, A., Smarsly, W., Fischer, R., Bartsch, M., Scholz, A. (2012): „Process chain simulation integrated in automatic optimization loops for developing cast parts founded by validated material models”, Proceeding of the 4th European Conference on Materials and Structures in Aerospace, 7-8 February 2012, Hamburg

LIT_066: Schumacher, A. (2011): “Weight reduction potential in cabriolet construction“, Proceedings of the 6th CTI Forum „Cabriolets“, 24.-25.10.2011, Munich, Germany

LIT_065: Schumacher, A., Ortmann, C. (2011): „Topology optimization – Research State of the Art“, Proceeding of the Automotive CAE Grand Challenge 2011, 19th and 20st of April 2011 in Hanau, Germany

LIT_064: Olschinka, C., Schumacher, A., Krüger, H. (2010): „Dynamische Simulationen für den Entwurf und zur Validierung von Fluggastsitzen“, Tagungsband des Deutschen Luft- und Raumfahrtkongress, Beitrag 161169, 163-171, 31.08.-02.09.2010 in Hamburg, ISBN 978-3-932182-67-7

LIT_063: Schumacher, A. (2010): „Multi Disciplinary Optimization – Research State of the Art“, Proceeding of the Automotive CAE Grand Challenge 2010, 30th and 31st of March 2010 in Hanau, Germany

LIT_062: Schumacher, A. (2010): Einführung in die Crashberechnung, Umdruck des Altair CAE-Seminars, erstes Seminar: 04.-05.03.2010 in Böblingen

LIT_061: Schumacher, A., Hakim, K. (2010): „Structural optimization processes for finding robust automotive lightweight concepts“, in: J. Wellnitz, A. Subic, M. Leary: Sustainable Automotive Technologies 2010, Proceeding of the 2nd International Confenence, Springer-Verlag, Heidelberg, Dordrecht, London, New York, 2010, 103-108, ISBN 978-3-642-10796-2

LIT_060: Schumacher, A., Hakim, K. (2010): “Erstellung von CAD/CAE-Prozessketten für effiziente Bauteilentwicklungen“, in Tecklenburg, G. (Hrsg.): Die digitale Produktentwicklung II, Expert-Verlag, Renningen, 2010, ISBN-13: 978-3-8169-2961-1

LIT_059: Schumacher, A., Hakim, K., Bartsch, M. (2009): “Shape optimization of cast parts with porous material”, Proc. of the 8th World Congress on Structural and Multidisciplinary Optimization, June 1-5, 2009, Lisbon, Portugal, ISBN 978-989-20-1554-5

LIT_058: Schumacher, A., Olschinka, C., Hoffmann, B. (2008): “Topology optimization based on graph theory of crash loaded flight passenger seats”, Proceeding of the 7th LS-DYNA Forum, Bamberg, 2008, ISBN 3-9809901-4-1 www.dynamore.de/de/download/papers/forum08/dokumente/F-III-02.pdf

LIT_057: Schumacher, A. (2008): Crashgerechte Karosserieentwicklung, CARHS Seminar Umdruck, erstes Seminar: 19.-20.06.2008 in Alzenau

LIT_056: Olschinka, C., Schumacher, A. (2008): „Graph based topology optimization of crashworthiness structures”, PAMM Proc. Applied Math. Mech., Volume 8 Issue 1, Pages 10029-10032, 2008 www.onlinelibrary.wiley.com/doi/10.1002/pamm.200810029/pdf

LIT_055: Abel, B., Schumacher, A., Bartsch, M. (2008): „Application of gradient based algorithms for robust shape optimization of a tensile test specimen”, PAMM Proc. Applied Math. Mech., Volume 8 Issue 1, Pages 10025 – 10028, 2008 www.onlinelibrary.wiley.com/doi/10.1002/pamm.200810025/pdf

LIT_054: Schumacher, A., Olschinka, C. (2008): “Robust Design considering highly nonlinear structural behavior”, Journal of Structural and Multidisciplinary Optimization (2008) 35: 263-272

LIT_053: Zimmer, H.; Schumacher, A. (2008): “SFE CONCEPT: Funktionsauslegung und Optimierung in der frühen Entwurfsphase”, in: Tecklenburg, G. (Hrsg.): Die digitale Produktentwicklung I, Expert-Verlag, Renningen, 2008, ISBN: 978-3-8169-2776-1

LIT_052: Schumacher, A. (2007): “Moderne CAE-Techniken in der Karosserieentwicklung“, Umdruck des 4. CTI Forum „Cabriolets“, 4.-5.12.2007 in Stuttgart Sindelfingen

LIT_051: Schumacher, A.; Olschinka, C. (2007): “General purpose software for parameter-based topology optimization”, Proceeding of the OPTIMUS Worldwide Users Meeting, 25.-26.06.2007 in Leuven, Belgium

LIT_050: Heimbs, S., Mehrens, T., Middeldorf, P., Maier, M.; Schumacher, A. (2007): “Numerical Determination of the Nonlinear Effective Mechanical Properties of Folded Core Structures for Aircraft Sandwich Panels”, Proceeding of the 6th European LS-DYNA Users Conference, 29.-30.05.2007 in Gothenburg, Sweden www.heimbs-online.de/Heimbs_2007_Folded_Core_Structures.pdf

LIT_049: Schumacher, A.; Seibel, M. (2007): “Lernen von der Luftfahrt: Leichtbaurealisierungen im Flugzeugbau“, Umdruck der 5. CTI Fachkonferenz „Modularisierung & Leichtbau im KFZ-Karosseriebau“, 24.04.2007 in Stuttgart

LIT_048: Schumacher, A.; Schramm, U.; Zhou, M. (2007): Structural optimization theory, Umdruck des Altair CAE-Seminar, erstes Seminar: 20.-21.03.2007 in Böblingen

LIT_047: Schumacher, A.; Tecklenburg, G. (2007): „Cost reduction using modern development methods in the vehicle body design“, Proceeding of the 25th European Car Body Conference, 13.-14.03.2007 in Bad Nauheim

LIT_046: Schumacher, A. (2006): „Physikalische Simulationstechniken für Multi-Material-Strukturen“, Umdruck der 4. CTI Fachkonferenz „Fahrzeugdach“, 13.-14.12.2006 in Mannheim

LIT_045: Schumacher, A. (2006): „Modern possibilities of shape and topology optimization of structures“, Noesis-Seminar Proceedures 2006; Tokio, Nagoya, Osaka

LIT_044: Schumacher, A., Seibel, M. (2006): “Karosserieleichtbau: Lernen von der Flugzeugentwicklung”, ATZ-Automobiltechnische Zeitschrift, 12/2006, 1068-1073

LIT_043: Olschinka, C., Schumacher, A., Riedel, D. (2006): “Dynamic Simulation of Flight Passenger Seats”, Proceeding of the 5th LS-DYNA Forum, Ulm, 2006

LIT_042: Olschinka, C., Schumacher, A. (2006): “Flight Passenger Seats, research on crash load cases“, Mobiles - Fachzeitschrift für Konstrukteure, Ausgabe 32 (2006/2007), 62-64

LIT_041: Schumacher, A., Seibel, M. (2006): “Leichtbau in der PKW-Karosserieentwicklung - Transferpotenziale aus der Luftfahrt”, Tagungsbuch „Karosseriebautage Hamburg 2006, Vieweg-Verlag, Wiesbaden

LIT_040: Schumacher, A. (2006): „Numerical optimization“, Proceeding of the EUROPADS Seminar „Lightweight Design of Aircraft Structures“, erstes Seminar: 18.-22.09.2006 in Hamburg

LIT_039: Schumacher, A. (2006): „Crashworthiness“, Proceeding of the EUROPADS Seminar „Lightweight Design of Aircraft Structures“, erstes Seminar: 18.-22.09.2006 in Hamburg

LIT_038: Schumacher, A.; Olschinka, C.; Zimmer, H., Schäfer, M. (2005): „Parameterbasierte Topologieoptimierung für crashrelevante Bauteile“, Unterlagen des Arbeitskreis Strukturoptimierung 18.-19. Oktober 2005, Stuttgart

LIT_037: Schumacher, A., Seibel, M., Zimmer, H., Schäfer, M. (2005): „New optimization strategies for crash design“, Proceeding of the 4th LS-DYNA Anwenderforum, Bamberg, 2005 www.dynamore.de/de/download/papers/forum05/new-optimization-strategies-for-crash-design

LIT_036: Schumacher, A. (2005): “Einführung der mathematischen Optimierung im Unternehmen - Konzepte und Erfolgsfaktoren“, NAFEMS Magazin, November 2005 – Ausgabe 2

LIT_035: Drescher, O., Seibel, M., Schumacher, A. (2005): Validation of Structural Analysis Models Simulation High-Lift Systems, Mobiles - Fachzeitschrift für Konstrukteure, Ausgabe 31 (2005/2006), 38-40

LIT_034: Schumacher, A. (2005): “Parameter-based topology optimization for crashworthiness structures”, Proc. of the World Congress on Structural and Multidisciplinary Optimization (WCSMO-6), Rio-de-Janeiro, Brazil, May 30 - June 3, 2005, ISBN: 85 – 285 – 0070 - 5

LIT_033: Schumacher, A. (2005): “Mathematical optimization in the development process of mechanical structures - Overview and rollout investigations -”, Proc. of the NAFEMS Seminar Optimization in Structural Mechanics, April, 27-28, 2005-03-25

LIT_032: Schumacher, A. (2005): Optimierung mechanischer Strukturen – Grundlagen und industrielle Anwendungen, Springer-Verlag, Heidelberg, 2005, ISBN 3-540-21887-4

LIT_031: Hierold, R., Merkel, M., Schumacher, A. (2004): „Effiziente Nutzung moderner CAE-Tools beim Konstruieren von Karosseriestrukturen“, VDI-Berichte 1833, 153-172

LIT_030: Schumacher, A. (2004): „Strategien für Mehrzieloptimierung, Multidisziplinäre Optimierung und Robustes Entwickeln“. Umdruck der Tagung „CAE-Optimierung in der Fahrzeugentwicklung“ vom Haus der Technik am 4.-5. Mai 2004 in Hamburg.

LIT_029: Merkel, M., Schumacher, A. (2003): “An Automated Optimization Process for a CAE Driven Product Development”. Journal of Mechanical Design, Transactions of the ASME 125 (4), 694-700

LIT_028: Schumacher, A. (2003): “Extended functions for the consideration of uncertainties in the definition of structural optimization problems”, Proc. of the World Congress of Structural and Multidisciplinary Optimization (WCSMO-5), Lido de Jesolo-Venice, Italy, May 19-23, 2003

LIT_027: Schumacher, A. (2003): “Zukunft der Bauteilentwicklung”, VDI-Kunstofftechnik: Kunststoffe im Automobilbau, 61-79, ISBN 3-18-234254-1

LIT_026: Schumacher, A., Hierold, R., Binde, P. (2002): “Finite-Element-Berechnung am Konstruktionsarbeitsplatz – Konzept und Realisierung“, Konstruktion Nov./Dez. 11/12 – 2002

LIT_025: Schumacher, A., Hierold, R. (2002): “Finite Element Analysis in Unigraphics”, Proc. of the PLM Europe Conference, Stuttgart, Oct. 7- 9, 2002

LIT_024: Schumacher, A., Hierold, R., Merkel, M. (2002): “Parametrisierte CAD-Modelle als Basis für eine CAE-gesteuerte Komponentenentwicklung”, VDI-Berichte 1701, 517-535

LIT_023: Schumacher, A. (2002): “Time-saving robust design considering crash performance behavior”, Proceedings of the Conference “Optimization in Industry 3”, I.C. Parmee, P. Hajela: Optimization in Industry, Springer-Verlag 2002

LIT_022: Schumacher, A., Döhler, A., Helmers, R., Scherf, O. (2001): “Einsatz moderner Approximations- und Optimierungsverfahrung in der Motorkalibrierung”, Umdruck der Tagung “Design of Experiments (DoE) in der Motorenentwicklung” vom Haus der Technik am 6.-7. Dezember 2001 in Berlin.

LIT_021: Schumacher, A. (2000): “Multidisciplinary Optimization Proves a Success at Opel”, LMS-News Vol. 15 No. 3, 2000

LIT_020: Becker, W., Engels, H., Schumacher, A. (2000): “Multi-disciplinary design optimization in the development of future aircraft”, Proceedings of the First International Conference on Design and Optimization, Oct., 23-24, 2000, Seoul, Korea

LIT_019: Schumacher, A. (2000): “Einsatz multidisziplinärer Optimierungssoftware im Entwicklungsprozeß”, Mobiles - Fachzeitschrift für Konstrukteure, Ausgabe 26 (2000/2001), 76-82

LIT_018: Brunies, F., Schumacher, A. (2000): “Optimization in Crash Simulation -Possiblilities of Massive Parallel Codes”, Proceedings of the 18th CAD-FEM Users’ Meeting, Sept. 20-22, 2000

LIT_017: Schumacher, A., Brunies, F. (2000): “Crash-Optimierung unter Einbeziehung weiterer, fachübergreifender Strukturanforderungen”, VDI-Berichte Nr. 1559, 275-297

LIT_016: Schumacher, A., Hierold, R. (2000): „Parameterized CAD-models for multidisciplinary optimization processes“. Collection of Technical Papers of the 8th AIAA/USAF/NASA/ISSMO-Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, Sept. 6-8, 2000, AIAA2000-4912, 1-11.

LIT_015: Schumacher, A., Becker, W., Eschenauer, H.A. (1999): „Analysis and optimization of composite laminates for the airframe wing design“. ZAMM-Z. angew. Math. Mech. 79 (1999) S3, 849-850

LIT_014: Eschenauer, H.A., Schumacher, A., Höhnlinger, H., Kiessling, F. (1998): „Multidisciplinary optimization strategy - tool for an efficient design process of large-scale aircraft vehicles“. Collection of Technical Papers of the 7th AIAA/USAF/NASA/ISSMO-Symposium on Multidisciplinary Analysis and Optimization, St. Louis, MO, Sept. 2-4, 1998, AIAA-98-4823, 924-927.

LIT_013: Schumacher, A., Becker, W.(1998): „Optimized lay-ups of composite laminates for airframe structural design“. In: S.V. Hoa, W.P. De Wilde, W.R. Blain (eds.): Computer Methods in Composite Materials VI, Computational Mechanics Publications, 13-23, Southhampton, UK.

LIT_012: Schumacher, A., Eschenauer, H.A. (1998): „Consideration of aeroelastic effects in the structural optimization process“, Proceedings of the DGLR- Aeroelastic Symposium, June 29-30, 1998, Göttingen.

LIT_011: Schumacher, A. (1998): „Erfahrungen bei der Integration der Finite-Elemente-Systeme MSC/PATRAN und MSC/NASTRAN in einer Multidisziplinären Optimierungsprozedur“. Umdruck der MSC Anwenderkonferenz, 18.-19.06.1998, Andechs.

LIT_010: Schumacher, A. (1997): „Bubble-Methode zur Gestalts- und Topologieoptimierung im Konstruktionsprozeß“. NAFEMS Seminarunterlagen zur Topologieoptimierung, 23. Sept. 1997, Aalen.

LIT_009: Schumacher, A. (1997): „Einsatz von Detailoptimierungsverfahren im multidisziplinären Konstruktionsprozeß”, VDI-Bildungswerk, Seminar 32-63-11: Optimierungsstrategie mit der Finite-Elemente-Methode, 3.-4-12.1997 in Aachen

LIT_008: Eschenauer, H.A., Schumacher, A. (1997): „Topology and Shape Optimization Procedures Using Hole Positioning Criteria - Theory and Applications“, in: G.I.N. Rozvany: Topology Optimization in Structural Mechanics, Springer-Verlag, Wien, New York, 1997, 135-196

LIT_007: Schumacher, A., Eschenauer, H.A. (1996): „Simultane Gestalts- und Topologieoptimierung in der Flugzeugentwicklung“. DGLR-Jahrbuch 1996 - II - 635-644, 1996.

LIT_006: Schumacher, A. (1996): Topologieoptimierung von Bauteilstrukturen unter Verwendung von Lochpositionierungskriterien. Dissertation, Universität Siegen, TIM-Forschungsberichte Nr. T09-01.96.

LIT_005: Eschenauer, H.A., Schumacher, A. (1995): „Simultaneous topology and shape optimization of structures“. Proceedings of the First World Congress of Structural and Multidisciplinary Optimization, May 28 - June 2, 1995, Goslar, Germany.

LIT_004: Eschenauer, H.A., Kobelev, V.V., Schumacher, A. (1994): „Bubble method for topology and shape optimization of structures“. Journal of Structural Optimization 8, 42-51.

LIT_003: Eschenauer, H.A., Schumacher, A. (1993): „Bubble Method: A special strategy for finding best possible initial designs“. American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 65 pt 2, pp. 437-443

LIT_002: Eschenauer, H.A., Schumacher, A., Vietor, T. (1993): „Decision makings for initial designs made of advanced materials“. In: M.P. Bendsoe, C.A. Mota Soares (eds.): Topology Design of Structures. Kluwer Academic Publishers, Netherlands, 469-480.

LIT_001: Eschenauer, H.A., Schumacher, A. (1993): „Possibilities of Applying Various Procedures of Topology Optimization to Components subject to Mechanical Loads“. ZAMM-Z. angew. Math. Mech. 73, T 392-T394.